<既然來了,就按個廣告吧>
N in 1 system
這是多進一進料系統
N IN 1 SYSTEM

s3d  換料CODE
============================================
G1 F9000 E-20.0

G1 F9000 X0 Y0

G1 F10000 Z298 ; Go to Z top prime position.

G1 F9000 X-130 Y-10 ; Go to X Y prime position.

G1 Z297 ; Go to Z prime position.


; G1 F120 E1 ; Prime old tool to get consistency end of filament

; G4 P3000 ; wait 5 sec to get a nice filament-end before tool change.

; G1 F9000 E-20 ; Prime old tool to get consistency end of filament

; G4 P2000 ;


G1 F6000 E-45 ;

G4 P6000 ;

G1 F4000 E-140 ;



T[new_tool]; Tool change


G92 E0 ; Zero tool.

G1 F1200 E135 ; Priming new tool.

G1 F90 E150;

G92 E0 ; Zero tool.

G1 F9000 E-20 ; Retract extruder by 3 mm to avoid thin string going to print area.

G1 X0 Y0 F9000;

G1 F8000 X[next_position_x] Y[next_position_y] ; Go to X Y printing position.

G1 F10000 Z[next_position_z]; Go to Z printing position.

G1 E0.5 F1200; Extrude 0.5mm that was retracted by 3.0mm at tool change

compensate for filament pressure in tube.

G92 E0; Set Extruder 0

============================================



12IN1TUBE


XCR-N

回首頁

FBBS-moko999